{"id":1339,"date":"2026-10-26T06:43:19","date_gmt":"2026-10-26T06:43:19","guid":{"rendered":"https:\/\/vanesen.com\/?p=1339"},"modified":"2026-10-26T06:53:46","modified_gmt":"2026-10-26T06:53:46","slug":"industrial-display-metal-housings-5-quality-requirements","status":"publish","type":"post","link":"https:\/\/vanesen.com\/fr\/industrial-display-metal-housings-5-quality-requirements\/","title":{"rendered":"Bo\u00eetiers m\u00e9talliques pour \u00e9crans industriels : 5 exigences de qualit\u00e9"},"content":{"rendered":"

A reliable industrial display metal housing must do more than hold the screen. It must support sealing, remain rigid during installation and keep critical interfaces within tolerance. VANESEN\u2019s CMM inspection video shows how selected features of a machined housing are measured. The following checklist turns demanding project requirements into clear acceptance criteria.<\/p>\n

\"Cadre
VANESEN front-frame assembly with keypad overlay. Image from the VANESEN website.<\/figcaption><\/figure>\n

1. Specify IP65 for the assembled enclosure<\/h2>\n

For projects requiring IP65, the installed display enclosure must meet the agreed protection scope under IEC 60529<\/a>. A bare metal frame alone does not establish an IP rating. Gaskets, the viewing window, joints, fasteners and cable entries must work together. Define whether the requirement covers the front face or the complete enclosure, then verify that configuration.<\/p>\n

2. Control rigidity and mounting flatness<\/h2>\n

The structure must resist unacceptable distortion under the specified mounting loads and operating conditions. Define material, wall thickness, support locations and fastening torque so that assembly does not pull the frame out of shape.<\/p>\n

Where the drawing requires mounting-surface flatness within 0.05 mm<\/strong>, identify the exact surface and inspection condition. Check the finished part rather than relying only on pre-finishing measurements. Use an appropriate CMM measurement strategy with adequate surface coverage; a few isolated points may miss local distortion.<\/p>\n

Temperature changes and excessive clamping can affect results. Allow the housing to reach a stable measurement temperature and support it without forcing it flat. ZEISS\u2019s CMM guidance<\/a> explains why environmental and fixturing controls matter.<\/p>\n

\"VANESEN
Illustrative front-frame and keypad PCBA assembly from the VANESEN website; not a test-result image.<\/figcaption><\/figure>\n

3. Match the anodized finish to the approved sample<\/h2>\n

For anodized aluminium housings, the visible colour must match the approved colour panel within agreed limits. Specify surface texture, viewing conditions and any permitted colour variation before production. If instrumental colour measurement is required, agree the method and tolerance.<\/p>\n

Appearance is only part of acceptance. Define coating thickness and sealing-quality checks as well. Agree the decorative and protective coating requirements before production; alloy selection and pretreatment also influence the finished appearance.<\/p>\n

4. Define the 144-hour salt spray requirement<\/h2>\n

Specify at least 144 hours of salt spray exposure<\/strong>, or a longer agreed duration, with documented acceptance criteria. For neutral salt spray, agree the test method and define the tested surfaces, specimen condition and permitted corrosion or appearance changes.<\/p>\n

Exposure time alone is not a pass criterion. The project specification must define acceptance limits, and salt spray hours do not directly predict outdoor service life.<\/p>\n

5. Connect inspection records to the drawing<\/h2>\n

Use first-article, in-process and final inspection stages as defined in the quality plan. Record the drawing revision, measured features, finishing checks and applicable environmental test results. CMM measurements verify geometry; separate evidence is needed for ingress protection and corrosion performance.<\/p>\n

Within an ISO 9001:2015 quality management framework, inspection responsibilities, records and the handling of nonconforming parts should be defined. Product acceptance still depends on the agreed drawings and test requirements.<\/p>\n

Planning a custom display metal housing? Send VANESEN your drawing, sealing scope, finish sample and inspection requirements<\/a>. Explore our metal structure manufacturing service<\/a> pour d\u00e9finir le p\u00e9rim\u00e8tre du projet.<\/p>","protected":false},"excerpt":{"rendered":"

A reliable industrial display metal housing must do more than hold the screen. It must support sealing, remain rigid during installation and keep critical interfaces within tolerance. VANESEN\u2019s CMM inspection video shows how selected features of a machined housing are measured. The following checklist turns demanding project requirements into clear acceptance criteria. VANESEN front-frame assembly […]<\/p>\n","protected":false},"author":1,"featured_media":1340,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[19],"tags":[],"class_list":["post-1339","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-testing-quality"],"yoast_head":"\nDisplay Metal Housing Quality: IP65 & Flatness | VANESEN<\/title>\n<meta name=\"description\" content=\"Specify industrial display metal housing quality: IP65 sealing, 0.05 mm mounting flatness, anodized colour matching and 144-hour salt spray testing.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/vanesen.com\/fr\/industrial-display-metal-housings-5-quality-requirements\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Industrial Display Metal Housings: 5 Quality Requirements | vanesen\" \/>\n<meta property=\"og:description\" content=\"A reliable industrial display metal housing must do more than hold the screen. It must support sealing, remain rigid during installation and keep critical\" \/>\n<meta property=\"og:url\" content=\"https:\/\/vanesen.com\/fr\/industrial-display-metal-housings-5-quality-requirements\/\" \/>\n<meta property=\"og:site_name\" content=\"vanesen.com\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61594336088658\" \/>\n<meta property=\"article:published_time\" content=\"2026-10-26T06:43:19+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-26T06:53:46+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"2560\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"hzsmold@163.com\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@vanesen_hmi\" \/>\n<meta name=\"twitter:site\" content=\"@vanesen_hmi\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"hzsmold@163.com\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/\"},\"author\":{\"name\":\"hzsmold@163.com\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/#\\\/schema\\\/person\\\/d01b1fea65c3a25bddfdfaf5af4ab29a\"},\"headline\":\"Industrial Display Metal Housings: 5 Quality Requirements\",\"datePublished\":\"2026-10-26T06:43:19+00:00\",\"dateModified\":\"2026-10-26T06:53:46+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/\"},\"wordCount\":515,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/vanesen-display-metal-front-frame.jpg\",\"articleSection\":[\"Testing & Quality\"],\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/\",\"url\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/\",\"name\":\"Display Metal Housing Quality: IP65 & Flatness | VANESEN\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/vanesen-display-metal-front-frame.jpg\",\"datePublished\":\"2026-10-26T06:43:19+00:00\",\"dateModified\":\"2026-10-26T06:53:46+00:00\",\"description\":\"Specify industrial display metal housing quality: IP65 sealing, 0.05 mm mounting flatness, anodized colour matching and 144-hour salt spray testing.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#breadcrumb\"},\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#primaryimage\",\"url\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/vanesen-display-metal-front-frame.jpg\",\"contentUrl\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/vanesen-display-metal-front-frame.jpg\",\"width\":2560,\"height\":2560,\"caption\":\"VANESEN industrial display metal front frame with keypad overlay\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/industrial-display-metal-housings-5-quality-requirements\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/vanesen.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Industrial Display Metal Housings: 5 Quality Requirements\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/#website\",\"url\":\"https:\\\/\\\/vanesen.com\\\/\",\"name\":\"vanesen.com\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/vanesen.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/#organization\",\"name\":\"Vanesen Manufacturing (Suzhou) Co., Ltd\",\"url\":\"https:\\\/\\\/vanesen.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/LOGO.png\",\"contentUrl\":\"https:\\\/\\\/vanesen.com\\\/wp-content\\\/uploads\\\/2026\\\/09\\\/LOGO.png\",\"width\":2125,\"height\":740,\"caption\":\"Vanesen Manufacturing (Suzhou) Co., Ltd\"},\"image\":{\"@id\":\"https:\\\/\\\/vanesen.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61594336088658\",\"https:\\\/\\\/x.com\\\/vanesen_hmi\",\"https:\\\/\\\/www.youtube.com\\\/@VanesenDisplay\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/lao-meisheng-358259437\\\/\"],\"description\":\"Optical bonding and industrial display and HMI integration, including engineering, component selection, metal manufacturing, assembly and project-specific inspection.\",\"email\":\"info@vanesen.com\",\"telephone\":\"+86 512 5328 8849\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/vanesen.com\\\/#\\\/schema\\\/person\\\/d01b1fea65c3a25bddfdfaf5af4ab29a\",\"name\":\"hzsmold@163.com\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g\",\"caption\":\"hzsmold@163.com\"},\"sameAs\":[\"http:\\\/\\\/vanesen.com\"],\"url\":\"https:\\\/\\\/vanesen.com\\\/fr\\\/author\\\/hzsmold163-com\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Display Metal Housing Quality: IP65 & Flatness | VANESEN","description":"Specify industrial display metal housing quality: IP65 sealing, 0.05 mm mounting flatness, anodized colour matching and 144-hour salt spray testing.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/vanesen.com\/fr\/industrial-display-metal-housings-5-quality-requirements\/","og_locale":"fr_FR","og_type":"article","og_title":"Industrial Display Metal Housings: 5 Quality Requirements | vanesen","og_description":"A reliable industrial display metal housing must do more than hold the screen. It must support sealing, remain rigid during installation and keep critical","og_url":"https:\/\/vanesen.com\/fr\/industrial-display-metal-housings-5-quality-requirements\/","og_site_name":"vanesen.com","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61594336088658","article_published_time":"2026-10-26T06:43:19+00:00","article_modified_time":"2026-10-26T06:53:46+00:00","og_image":[{"width":2560,"height":2560,"url":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg","type":"image\/jpeg"}],"author":"hzsmold@163.com","twitter_card":"summary_large_image","twitter_creator":"@vanesen_hmi","twitter_site":"@vanesen_hmi","twitter_misc":{"\u00c9crit par":"hzsmold@163.com","Dur\u00e9e de lecture estim\u00e9e":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#article","isPartOf":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/"},"author":{"name":"hzsmold@163.com","@id":"https:\/\/vanesen.com\/#\/schema\/person\/d01b1fea65c3a25bddfdfaf5af4ab29a"},"headline":"Industrial Display Metal Housings: 5 Quality Requirements","datePublished":"2026-10-26T06:43:19+00:00","dateModified":"2026-10-26T06:53:46+00:00","mainEntityOfPage":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/"},"wordCount":515,"commentCount":0,"publisher":{"@id":"https:\/\/vanesen.com\/#organization"},"image":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#primaryimage"},"thumbnailUrl":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg","articleSection":["Testing & Quality"],"inLanguage":"fr-FR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/","url":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/","name":"Display Metal Housing Quality: IP65 & Flatness | VANESEN","isPartOf":{"@id":"https:\/\/vanesen.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#primaryimage"},"image":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#primaryimage"},"thumbnailUrl":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg","datePublished":"2026-10-26T06:43:19+00:00","dateModified":"2026-10-26T06:53:46+00:00","description":"Specify industrial display metal housing quality: IP65 sealing, 0.05 mm mounting flatness, anodized colour matching and 144-hour salt spray testing.","breadcrumb":{"@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#breadcrumb"},"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#primaryimage","url":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg","contentUrl":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/10\/vanesen-display-metal-front-frame.jpg","width":2560,"height":2560,"caption":"VANESEN industrial display metal front frame with keypad overlay"},{"@type":"BreadcrumbList","@id":"https:\/\/vanesen.com\/industrial-display-metal-housings-5-quality-requirements\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/vanesen.com\/"},{"@type":"ListItem","position":2,"name":"Industrial Display Metal Housings: 5 Quality Requirements"}]},{"@type":"WebSite","@id":"https:\/\/vanesen.com\/#website","url":"https:\/\/vanesen.com\/","name":"vanesen.com","description":"","publisher":{"@id":"https:\/\/vanesen.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/vanesen.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/vanesen.com\/#organization","name":"Vanesen Manufacturing (Suzhou) Co., Ltd","url":"https:\/\/vanesen.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/vanesen.com\/#\/schema\/logo\/image\/","url":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/09\/LOGO.png","contentUrl":"https:\/\/vanesen.com\/wp-content\/uploads\/2026\/09\/LOGO.png","width":2125,"height":740,"caption":"Vanesen Manufacturing (Suzhou) Co., Ltd"},"image":{"@id":"https:\/\/vanesen.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61594336088658","https:\/\/x.com\/vanesen_hmi","https:\/\/www.youtube.com\/@VanesenDisplay","https:\/\/www.linkedin.com\/in\/lao-meisheng-358259437\/"],"description":"Collage optique et int\u00e9gration d'\u00e9crans industriels et d'interfaces homme-machine (IHM), y compris l'ing\u00e9nierie, la s\u00e9lection des composants, la fabrication m\u00e9tallique, l'assemblage et les contr\u00f4les sp\u00e9cifiques au projet.","email":"info@vanesen.com","telephone":"+86 512 5328 8849"},{"@type":"Person","@id":"https:\/\/vanesen.com\/#\/schema\/person\/d01b1fea65c3a25bddfdfaf5af4ab29a","name":"hzsmold@163.com","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/secure.gravatar.com\/avatar\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/213c11e5170307338cf0776b74ee90dc521ec49f233738f079297c959628fb57?s=96&d=mm&r=g","caption":"hzsmold@163.com"},"sameAs":["http:\/\/vanesen.com"],"url":"https:\/\/vanesen.com\/fr\/author\/hzsmold163-com\/"}]}},"_links":{"self":[{"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/posts\/1339","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/comments?post=1339"}],"version-history":[{"count":3,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/posts\/1339\/revisions"}],"predecessor-version":[{"id":1345,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/posts\/1339\/revisions\/1345"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/media\/1340"}],"wp:attachment":[{"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/media?parent=1339"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/categories?post=1339"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/vanesen.com\/fr\/wp-json\/wp\/v2\/tags?post=1339"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}