INDUSTRIES / EV CHARGING
EV Charging Display Integration
Ambiente applicativo
EV charging display integration starts with the installation and operator needs. Proposed application: an embedded display and touch module on a public charging cabinet.
A user reads instructions and charging status while standing in front of the cabinet. Define sun exposure, rain on the screen, outdoor storage conditions and heat from equipment behind the display. The charging enclosure and front module share the weather-protection boundary.
Protezione termica e frontale
Specify ambient and internal powered temperatures separately from storage. If front IP65 is required, verify the front module with its intended gasket and cabinet opening. Do not infer operating limits from the −40 to +85°C storage range of another project.
02 / SFIDE RELATIVE ALL'APPLICAZIONE
Sfide relative ai display e alle interfacce uomo-macchina (HMI)
Reflections in changing daylight
Check the viewing angle, front reflection and available thermal margin together when selecting the LCD.
Rain and user input
Define behaviour with droplets on the cover and with the intended gloves. Water rejection and successful intentional touch need separate acceptance criteria.
Exposure and service access
Assess front-surface durability, cable routing near power electronics and replacement access inside the cabinet.
03 / STRUTTURA DI INTEGRAZIONE
EV charging display integration approach
Display and cover selection
Valutare LCD readability and cover treatment at the intended outdoor location; use bonding where the stack review supports it.
Touch control under defined conditions
Match the sensor, controller, cover thickness and installed grounding. Evaluate the chosen combination under the agreed wet and glove conditions.
Cabinet integration
Use a front frame, perimeter gasket and supported mounting points matched to the cabinet; coordinate cable paths with the charging-system designer.
04 / MODULO DI CONSEGNA
EV charging display integration: proposed delivery
Consegna prevista: a front-mounted display and touch module for an EV charging cabinet.
- LCD, cover and touch sensor as a coordinated front stack
- Selected touch controller and agreed display/touch connections
- Mounting carrier and specified front sealing components
Charging power electronics, payment hardware, charging software and charger-level certification are not included in this proposed HMI module.
Sviluppare il layout attraverso revisione tecnica, quindi concordare il piano di verifica dell'assemblaggio. Invia i documenti richiesti per la candidatura per definire l'ambito del progetto.
Utilizza il Lista di controllo sintetica del progetto di integrazione dei display per organizzare i disegni e le domande aperte. Il nostro risorse ingegneristiche comprendono anche i dati relativi alle materie prime e i registri di ispezione.