INDUSTRIES / EV CHARGING
EV Charging Display Integration
Entorno de aplicación
EV charging display integration starts with the installation and operator needs. Proposed application: an embedded display and touch module on a public charging cabinet.
A user reads instructions and charging status while standing in front of the cabinet. Define sun exposure, rain on the screen, outdoor storage conditions and heat from equipment behind the display. The charging enclosure and front module share the weather-protection boundary.
Protección térmica y frontal
Specify ambient and internal powered temperatures separately from storage. If front IP65 is required, verify the front module with its intended gasket and cabinet opening. Do not infer operating limits from the −40 to +85°C storage range of another project.
02 / RETOS DE LA APLICACIÓN
Retos relacionados con las pantallas y las interfaces hombre-máquina (HMI)
Reflections in changing daylight
Check the viewing angle, front reflection and available thermal margin together when selecting the LCD.
Rain and user input
Define behaviour with droplets on the cover and with the intended gloves. Water rejection and successful intentional touch need separate acceptance criteria.
Exposure and service access
Assess front-surface durability, cable routing near power electronics and replacement access inside the cabinet.
03 / ESTRUCTURA DE INTEGRACIÓN
EV charging display integration approach
Display and cover selection
Evaluar LCD readability and cover treatment at the intended outdoor location; use bonding where the stack review supports it.
Touch control under defined conditions
Match the sensor, controller, cover thickness and installed grounding. Evaluate the chosen combination under the agreed wet and glove conditions.
Cabinet integration
Use a front frame, perimeter gasket and supported mounting points matched to the cabinet; coordinate cable paths with the charging-system designer.
04 / FORMULARIO DE ENTREGA
EV charging display integration: proposed delivery
Entrega prevista: a front-mounted display and touch module for an EV charging cabinet.
- LCD, cover and touch sensor as a coordinated front stack
- Selected touch controller and agreed display/touch connections
- Mounting carrier and specified front sealing components
Charging power electronics, payment hardware, charging software and charger-level certification are not included in this proposed HMI module.
Desarrolla el diseño mediante revisión técnica, y a continuación acordar el plan de verificación del montaje. Envía los documentos necesarios para tu solicitud para definir el alcance del proyecto.
Utiliza el Lista de comprobación del resumen del proyecto de integración de pantallas para organizar los dibujos y las preguntas abiertas. Nuestro recursos de ingeniería También abarcan las entradas de componentes y los registros de inspección.